SQUARE

Zintra Blades are prefabricated, wall mounted systems that showcase Zintra’s flexible characteristics.

Combining a dynamic aesthetic appeal and acoustic performance these systems are supplied ready to install with minimum fuss. A great advantage of the vertical blades is the increased surface area that is presented to the room resulting in a greater absorption of sound compared to flat panels (NRC = 0.95).

product-specs
Description / Features Zintra Blades are prefabricated, wall mounted systems that showcase Zintra's flexible characteristics.

Combining a dynamic aesthetic appeal and acoustic performance these systems are supplied ready to install with minimum fuss. A great advantage of the vertical blades is the increased surface area that is presented to the room resulting in a greater absorption of sound compared to flat panels (NRC = 0.9).
How to specify 1. Design
2. Size
3. Colour (multi-colour available with a surcharge)
Composition 100% Solution Dyed (Colour Through) Polyester blades with mild steel tube
Finishes Available Zintra 12mm (1/2") Colour Range
Standard Size 1220mm x 1375mm x 114mm (48" x 54" x 4.5")
1220mm x 2800mm x 114mm (48" x 108" x 4.5")
Indoor/Outdoor Indoor only
Wet Areas No
Pattern Repeat N/A
Suggested Installation Insert tube into pre-cut holes in the blades.
Move blades into correct position.
Fix tube off to the wall with screws (not supplied).
Thermoformable No
Brand Spec Zintra - check out the complete range
Fire Rating ASTM E-84 – Class A
E-13501 – B-s2-d0
AS 5637.1:2015 - Group 1
Supplied As Pre fabricated blades, notched tube
Fabrication Standard woodworking tools or Stanley knife
Refinishable No
Care Instruction Remove spills immediately using damp, clean cloth.

Dab Zintra with a clean, soft white cloth dampened with a mild solution of liquid detergent and warm water. Repeat using only clean water, then pat dry with a lint free cloth.

Avoid using wax polishes, solvents or concentrated abrasives.

For more difficult stains, dampen a soft white cloth with a solution of household bleach (10% bleach / 90% water). Dab gently. Repeat using only a clean, water dampened cloth to remove bleach concentration then pat dry with a lint free cloth.

Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contact Baresque for assistance.
Environmental Information Easily recycled through standard recycling channels
Product specification Download >